Engine Control Module Ecm - Cardone Reman - Engine Control Module (Part Number: 79-6428V)
- CTO: US
- Emission Code: 1
- Canadian Harmonizing Tariff Code: 8543700000
- Harmonized Tariff Code (Schedule B): 8543709665
- Harmonized Tariff Code (HTS): 8543709860
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- Maximum Cases per Pallet Layer: 75
- Pallet Layer Maximum: 6
- Remanufactured Part: Y
- Warranty Distance: 18000
- Warranty Distance UOM: MI
- Warranty Special UOM: TX
- Warranty Time: 12
- Warranty Time UOM: MO
- Application Summary: Chrysler 300 2005 Dodge Magnum 2005
- AAIA Part Type Description: Engine Control Module
- Product Description - Invoice: Reman. Engine Control Computer
- Key Search Words: Engine Control Computer, ECC, ECM, Engine Control Module, Computer, Module
- Label Description: Remanufactured Engine Control Computer
- Marketing Description: CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
- Short Product Description: Engine Ctrl Comp.
- Connector Quantity: 3
- Connector Shape: Rectangle
- E-Waste: Yes
- FAQs: The replacement ECM for a Ford vehicle won't start the vehicle. Why?
- FAQs: What steps should I take to assure the original ecm/pcm is causing the issue?
- FAQs: Do all Chrysler Power Train Control Modules (PCM) need vin programming?
- FAQs: Do all Ford vehicles require a Passive Anti Theft System (P.A.T.S) reset?
- FAQs: I replaced the PCM in my GM vehicle. Do I need to reset the Passlock or Passkey Vehicle Anti Theft System (VATS)?
- FAQs: Yes, there's a 10 minute procedure utilizing a Tech 2 Scanner and a GM Terminal Subscription. There is also a 30 minute manual procedure that can be done without a scanner. Refer to an OE approved service manual for either option.
- FAQs: Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common areas that cause failures are: poor grounds and powers, bad wiring harness, shorted solenoids/relays.
- FAQs: The wrong ECM may have been installed. Verify the Ford Engineering Id number, found on the ECM/PCM, crosses to the correct CARDONE number.
- FAQs: No, not all Ford vehicles require a PATS reset. Check the PATS chart found on the MotorCraft Site for your application.
- FAQs: Chrysler PCM's identified with a \"V\" suffix will need to be vin programmed.
- Flash Programming Required: Yes
- Flashable: No
- Housing Material: Aluminum
- Mounting Hardware Included: No
- Mounting Hole Quantity: 3
- Product Condition: Remanufactured
- Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Removable PROM: No
- Terminal Quantity: 383838
- Terminal Type: Pin
- Manufacturer:
- Cardone Reman
- Part Number:
- 79-6428V
- Manufacturer Part Number:
- 79-6428V
- Description:
- Engine Control Module Ecm
- Long Description:
- Engine Control Module
- Part Type:
- Engine Control Module Ecm
- Category:
- Engine
- Subcategory:
- Control Modules
- Warehouse Notes:
- .79-6428V
- Sales Rank:
Product Details
- Core Price:
- ...
- Weight:
- 2.051 lbs.
- Height:
- 3.25"
- Width:
- 7.375"
- Length:
- 7.375"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 082617943239
- Item Location:
- Essex, MD
Technical Details
- CTO
- US
- Emission Code
- 1
- Canadian Harmonizing Tariff Code
- 8543700000
- Harmonized Tariff Code (Schedule B)
- 8543709665
- Harmonized Tariff Code (HTS)
- 8543709860
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- Maximum Cases per Pallet Layer
- 75
- Pallet Layer Maximum
- 6
- Remanufactured Part
- Y
- Warranty Distance
- 18000
- Warranty Distance UOM
- MI
- Warranty Special UOM
- TX
- Warranty Time
- 12
- Warranty Time UOM
- MO
- Application Summary
- Chrysler 300 2005 Dodge Magnum 2005
- AAIA Part Type Description
- Engine Control Module
- Product Description - Invoice
- Reman. Engine Control Computer
- Key Search Words
- Engine Control Computer, ECC, ECM, Engine Control Module, Computer, Module
- Label Description
- Remanufactured Engine Control Computer
- Marketing Description
- CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
- Short Product Description
- Engine Ctrl Comp.
- Connector Quantity
- 3
- Connector Shape
- Rectangle
- E-Waste
- Yes
- FAQs
- The replacement ECM for a Ford vehicle won't start the vehicle. Why?
- FAQs
- What steps should I take to assure the original ecm/pcm is causing the issue?
- FAQs
- Do all Chrysler Power Train Control Modules (PCM) need vin programming?
- FAQs
- Do all Ford vehicles require a Passive Anti Theft System (P.A.T.S) reset?
- FAQs
- I replaced the PCM in my GM vehicle. Do I need to reset the Passlock or Passkey Vehicle Anti Theft System (VATS)?
- FAQs
- Yes, there's a 10 minute procedure utilizing a Tech 2 Scanner and a GM Terminal Subscription. There is also a 30 minute manual procedure that can be done without a scanner. Refer to an OE approved service manual for either option.
- FAQs
- Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common areas that cause failures are: poor grounds and powers, bad wiring harness, shorted solenoids/relays.
- FAQs
- The wrong ECM may have been installed. Verify the Ford Engineering Id number, found on the ECM/PCM, crosses to the correct CARDONE number.
- FAQs
- No, not all Ford vehicles require a PATS reset. Check the PATS chart found on the MotorCraft Site for your application.
- FAQs
- Chrysler PCM's identified with a \"V\" suffix will need to be vin programmed.
- Flash Programming Required
- Yes
- Flashable
- No
- Housing Material
- Aluminum
- Mounting Hardware Included
- No
- Mounting Hole Quantity
- 3
- Product Condition
- Remanufactured
- Product Line Marketing Stmt
- After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Removable PROM
- No
- Terminal Quantity
- 383838
- Terminal Type
- Pin
Specifications
The CARDONE REMAN Engine Control Module Ecm contains no remanufactured components, and is designed to operate in either city or highway driving.
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.