To make sure this part does fit your vehicle Check The Fit
Fuel Pump Hanger Assembly - Airtex Automotive Division - Fuel Pump Hanger Assembly (Part Number: E2475S)
- Abbreviated Product Description: FPHA
- Application Summary: 2006-2010 Ford Crown Victoria (Liter: 4.6 & Cylinder: 8 & Block: V & Engine VIN: V & Fuel: FLEX / Qualifier: To 09/25/2009) 2006-2010 Lincoln Town Car (Liter: 4.6 & Cylinder: 8 & Block: V & Engine VIN: V & Fuel: FLEX / Qualifier: To 09/25/2009) 2006-2010 Mercury Grand Marquis (Liter: 4.6 & Cylinder: 8 & Block: V & Engine VIN: V & Fuel: FLEX / Qualifier: To 09/25/2009)
- AAIA Part Type Description: Fuel Pump Hanger Assembly
- Product Description - Invoice: Fuel Pump Hanger Assembly
- Marketing Description: Airtex fuel pump hanger assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Airtex fuel pump assemblies offer an exact-fit solution that meets or exceeds OE specifications. Every single pump is 100% tested throughout the entire manufacturing process for worry free, out of the box performance.
- Short Product Description: Electric Fuel Pump
- California Proposition 65: No Proposition 65 warning is required with this product.
- Connector Gender: Male
- Connector Shape: Round
- Filter Included: No
- Flow Rate: 20 GPH
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket Included: Y
- Gasket Or Seal Included: Yes
- Grade Type: Regular
- In Tank or External: In Tank
- Inlet Fitting Thread Size: 3/8 inch
- Inlet Type: Strainer
- Internal Or External: Internal
- Internal Or External Strainer: External
- Lock Ring Included: No
- Minimum Flow Rating: 20 GPH
- Minimum Pressure: 60.0 PSI
- Mounting Hardware Included: No
- Negative Ground: Yes
- Outlet Type: Quick Connect
- Pump Type: Electrical
- Pump Type: Electric
- Strainer Included: Yes
- Terminal Type: Pin
- Universal Or Specific Fit: Specific
- Voltage: 12V
- Wiring Harness Included: Yes
- CTO: CN
- ECN: EAR99
- Emission Code: 1
- Harmonized Tariff Code (HTS): 8413309030
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- National Popularity Description: Next 15% of Product Group Sales Value
- NPS: C
- Maximum Cases per Pallet Layer: 8
- Pallet Layer Maximum: 5
- PRC: NEW
- Taxable: Y
- Warranty Special: Limited Lifetime Warranty
- Warranty Special UOM: TX
- Manufacturer:
- Airtex Automotive Division
- Part Number:
- E2475S
- Manufacturer Part Number:
- E2475S
- Description:
- Fuel Pump Hanger Assembly
- Long Description:
- Fuel Pump Hanger Assembly
- Part Type:
- Fuel Pump Hanger Assembly
- Category:
- Air And Fuel Delivery
- Subcategory:
- Fuel Pumps And Related Components
- Warehouse Notes:
- LTD LTIME WARR FUEL PUMP W/STRAINERL
- Sales Rank:
Product Details
- Core Price:
- ...
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 3.74 lbs.
- Height:
- 7"
- Width:
- 13"
- Length:
- 13"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 080044035442
- Item Location:
- Essex, MD
Technical Details
- Abbreviated Product Description
- FPHA
- Application Summary
- 2006-2010 Ford Crown Victoria (Liter: 4.6 & Cylinder: 8 & Block: V & Engine VIN: V & Fuel: FLEX / Qualifier: To 09/25/2009) 2006-2010 Lincoln Town Car (Liter: 4.6 & Cylinder: 8 & Block: V & Engine VIN: V & Fuel: FLEX / Qualifier: To 09/25/2009) 2006-2010 Mercury Grand Marquis (Liter: 4.6 & Cylinder: 8 & Block: V & Engine VIN: V & Fuel: FLEX / Qualifier: To 09/25/2009)
- AAIA Part Type Description
- Fuel Pump Hanger Assembly
- Product Description - Invoice
- Fuel Pump Hanger Assembly
- Marketing Description
- Airtex fuel pump hanger assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life. Airtex fuel pump assemblies offer an exact-fit solution that meets or exceeds OE specifications. Every single pump is 100% tested throughout the entire manufacturing process for worry free, out of the box performance.
- Short Product Description
- Electric Fuel Pump
- California Proposition 65
- No Proposition 65 warning is required with this product.
- Connector Gender
- Male
- Connector Shape
- Round
- Filter Included
- No
- Flow Rate
- 20 GPH
- Fuel Sending Unit Included
- Yes
- Fuel Tank Pressure Sensor Included
- No
- Gasket Included
- Y
- Gasket Or Seal Included
- Yes
- Grade Type
- Regular
- In Tank or External
- In Tank
- Inlet Fitting Thread Size
- 3/8 inch
- Inlet Type
- Strainer
- Internal Or External
- Internal
- Internal Or External Strainer
- External
- Lock Ring Included
- No
- Minimum Flow Rating
- 20 GPH
- Minimum Pressure
- 60.0 PSI
- Mounting Hardware Included
- No
- Negative Ground
- Yes
- Outlet Type
- Quick Connect
- Pump Type
- Electrical
- Pump Type
- Electric
- Strainer Included
- Yes
- Terminal Type
- Pin
- Universal Or Specific Fit
- Specific
- Voltage
- 12V
- Wiring Harness Included
- Yes
- CTO
- CN
- ECN
- EAR99
- Emission Code
- 1
- Harmonized Tariff Code (HTS)
- 8413309030
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- National Popularity Description
- Next 15% of Product Group Sales Value
- NPS
- C
- Maximum Cases per Pallet Layer
- 8
- Pallet Layer Maximum
- 5
- PRC
- NEW
- Taxable
- Y
- Warranty Special
- Limited Lifetime Warranty
- Warranty Special UOM
- TX
Specifications
The AIRTEX AUTOMOTIVE DIVISION Fuel Pump Hanger Assembly contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2010 | Mercury | Grand Marquis | 4.6L | [Fuel Pump Hanger Assembly] VIN: V, FLEX; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.